How to Fix Sony TV Screen Blue Tint? It’s hard to imagine how frustrating it is to find that the screen of your Sony TV has a blue tint when you’re watching your favorite show or movie.
In many cases, a blue-tinted Sony TV screen can be resolved using a few straightforward steps. This issue can significantly lower your viewing experience and leave you wondering why it occurred.
This blog will show you how to fix the dreaded blue tint on your Sony TV. We will analyze the possible causes behind this problem, offer practical troubleshooting methods, and provide valuable insight to help you enjoy your TV in its true and vibrant colors.
The annoying blue tint can be replaced by a more enjoyable viewing experience.
How to Fix Sony TV Screen Blue Tint?
Unplug the TV and hold down the power button for 15 seconds during which time any remaining charge will be drained from the TV. Plug the TV back in, and the blue tint will disappear. #
There are a few simple steps you can take to get rid of a blue tint on your Sony TV screen. Here are the steps you can take:
Power Cycle Your Sony TV to Reset It
Sony televisions often benefit from a simple step such as power cycling to fix blue tints.
You can reset your TV without losing your personal settings if you reset the main board. This clears out any issues with your TV’s non-permanent memory.
This process is quick and painless, which means that your saved settings won’t be lost.
- Make sure your TV is unplugged and switched off.
- Hold down the power button on the TV for at least 15 seconds.
The power button can be found on the side of the TV, or beneath the Sony logo
- Allow the capacitors in the TV to drain for at least two minutes (they can store a lot of charge for several minutes).
- You should see a red light on your TV if you have succeeded. Plug it back in and turn it on.
It is amazing how long the components of your TV can hold a charge if it doesn’t fully reset after two minutes.
The easiest way to solve most problems is by soft resetting your device, regardless of how obvious it may seem.
After resetting your Sony TV, you should have it working again. But if the blue tint persists, we have a few simple fixes to try before we move on to the hardware. # How to Fix Sony TV Screen Blue Tint?
Update Sony Tv Firmware
Software or firmware issues have been known to cause problems with Sony TV displays.
Make sure that your Sony TV’s firmware is up-to-date, no matter how old or new it is. # Update Sony Tv Firmware
These steps will guide you through updating the firmware on most Sony TVs:
- Press the Settings button on the remote control.
- Setup, Customer Support, or Product Support are all available to you.
- Getting automatic software updates requires you to accept the Privacy Policy. Locate it under Help -> Privacy Policy.
- Otherwise, choose Software Update.
- Select your network and click Yes or OK to begin the update process.
Sony Android TVs should follow these instructions:
- Home can be accessed by using your remote control.
- Here is where you can get help.
- Select Status & Diagnostics from the menu.
- It is then necessary to update the software on the system.
- Updates can be checked manually or automatically by switching on the Software Update button.
For Sony Google TVs:
- The settings button on your remote control should be selected.
- Go to the System tab.
- Here’s what we’ll talk about next.
- Also, system software needs to be updated.
- Check for updates manually by clicking the Software Update button. Make sure Automatically check for updates is enabled.
Check the TV’s HDMI Cables
A poorly seated cable can automatically switch inputs on your TV, but won’t fully connect; this causes signal noise, resulting in a blue tint on your screen.
This is also the cause of Sony TVs not turning on.
It’s up to you to make a choice between:
- HDMI cable has been broken
- The HDMI pins on a damaged HDMI port are broken
- HDMI connector and cable do not fully make contact, resulting in a poor connection
You can check your HDMI and other cables by following these steps:
- Make sure your TV is on standby.
- Remove any HDMI or other physical cables connected to your TV.
- In the absence of compressed air, gently blow on the connectors and cable contacts of your TV.
- Put the TV cables back into their slots by pushing them firmly.
- You should now be able to turn on your TV again.
If you use another HDMI input, the problem may still persist. Most TVs have more than one HDMI port.
Put your HDMI cable in the new port, note the number next to it, and choose this HDMI input on your TV using the Input or Source button on your remote or the Input or Menu button on your TV.
To avoid interference from external devices, like Bluetooth devices, coaxial cables, or signal cables, it may be helpful to remove all external devices. # How to Fix Sony TV Screen Blue Tint?
What is Android storage/emulated/0?
Factory Reset Your Sony TV
When you haven’t been able to resolve your problem with other methods, you can always return your TV to factory settings.
If other options haven’t worked, it’s always worth a shot to remove any personalization features, installed apps, or connected devices.
The steps below will guide you through factory resetting a Sony TV that isn’t an Android device:
- Turn off your television by unplugging it.
- If the TV hasn’t been connected for one minute, reconnect it.
- Push the Power button on the remote or on the TV itself if it doesn’t turn on automatically.
- When the TV is on and loaded, press both the Up arrow and Power buttons simultaneously until the word “Reset” appears.
- Once “Reset” appears on the screen, press both the Up and Power buttons.
- The initial setup screen of your TV will now appear after it has been reset.
These steps are demonstrated in the video below.
To reset your Android Sony TV to factory settings if your remote isn’t working, follow these steps:
- Pressing the Settings button will allow you to change your settings.
- System can be selected from the menu.
- Then About.
- Reset the system.
- The factory data reset option should be selected.
- Once you’ve erased all your data, confirm that you wish to do so. If a PIN is required, enter 9999.
For instructions on resetting other Sony Android TV models, watch the video below.
Replace Your Sony TV’s Backlights
LEDs in TV backlights that are older than two or three years tend to burn out easily, giving them a blue tint.
Using blue-light LEDs as a base, yellow phosphor coatings are applied over the LEDs in Sony TV backlights.
The television produces white light by passing blue light through yellow phosphor.
When the phosphor burns off after a few years, blue light can shine through unfiltered, tinting your screen blue.
Fortunately, replacing these LEDs is not an expensive job, though you will have to do some of the work yourself.
If you don’t feel comfortable disassembling your TV, or if you want to replace it, now is the time to get a professional in.
Conclusion
The blue-tinted screen of your Sony TV can be a frustration if you’re looking for an immersive, enjoyable viewing experience. This blog will provide you with knowledge and practical solutions to resolve this issue.
You’ve learned how to diagnose and fix problems, whether they’re adjusting your picture settings, resolving cable problems, or updating your TV’s software.