How To Fix Palm Swipe To Capture Not Working?

How To Fix Palm Swipe To Capture Not Working? Users of Android smartphones commonly use the “Palm Swipe to Capture” gesture to take screenshots.

However, there may be times when this feature stops working. If you’ve encountered this problem, you’re not alone.

You will find a step-by-step guide to troubleshoot and resolve your “Palm Swipe to Capture” issue in this blog post, including reasons why it may not work on your Android device.

Whether you’re trying to capture important information or simply want to regain the convenience of this feature, our aim is to help you get it working smoothly again. # Palm Swipe To Capture Not Working

How To Enable Palm Swipe on Samsung Devices?

  • Your phone’s settings can be found under “Settings”.
  • You can find it in Settings under “Advanced Features -> Motion & Gesture”.
  • Turn on “Palm Swipe To Capture” by tapping it.

You have successfully enabled the palm swipe to capture gesture motion feature on your Samsung device.

Many users make mistakes with palm swipe gesture motions, which results in not capturing screenshots. A possible mistake is as follows:

  • By swiping the palm over the selfie camera, the user attempts to take a selfie.
  • There is someone using the keyboard.

Both of the above approaches are incorrect. If you simply swipe your hand in the air or over the selfie camera, you will not be able to capture the motion.

You should also make sure that your phone’s keyboard isn’t active while you’re making a palm swipe to capture motion. If the keyboard is still being used, then it won’t work.

How To Find Someone Ip Address On Discord?

How To Fix Palm Swipe To Capture Not Working?

Your Android device may not be able to use the “Palm Swipe to Capture” feature if you follow these steps to troubleshoot it:

1. Enable Palm Swipe to Capture:

  • You can do this by going to the “Settings” section of your device.
  • Depending on your device, scroll down and select “Advanced features” or “Motions and gestures.”
  • Turn on the “Palm swipe to capture” option or a similar one.

2. Check for Software Updates:

  • Check for updates in the Settings > “Software Update” section of your Android operating system. Outdated software can sometimes cause issues with features. # Palm Swipe To Capture Not Working

3. Ensure Proper Gesture Execution:

  • Swipe your palm horizontally across the screen with your fingers lightly touching it, if you want to use the “Palm Swipe to Capture” feature.

4. Disable and Re-Enable the Feature:

  • You can try turning it off and then on again if the feature is already enabled:
    • Navigate to the “Settings” page.
    • Go to “Advanced features” or “Motions and gestures.”
    • Enable “Palm swipe to capture” by finding it and disabling it.
    • It should be enabled again once it has been re-enabled.

5. Clear Cache Partition (Samsung Devices):

  • Sometimes, Samsung devices can be resolved by clearing their cache partitions:
    • Make sure your device is turned off.
    • Hold down the power button while pressing the volume up and Bixby buttons (if applicable).
    • When you see the Android logo, release all buttons.
    • Choose “Wipe Cache Partition” by using the volume buttons and the power button.
    • When the process has been completed, select “Reboot now.” # Palm Swipe To Capture Not Working

6. Check for Third-Party Apps:

  • It is possible for third-party apps or screen overlay apps to interfere with gestures. You may want to try disabling or uninstalling any apps that were recently installed.

7. Factory Reset (Last Resort):

  • The final step you can take if none of the above steps work is to perform a factory reset on your device. Backup any important data before doing this, as it will erase everything on the device.
Palm Swipe To Capture Not Working

8. Contact Manufacturer Support:

  • You may need to reach out to the manufacturer of your device or Android support if the problem persists after you have tried all the troubleshooting steps.

Steps and options may vary according to the model and make of your Android device. Be careful when performing a factory reset, as it will delete all data on your device.

Always back up your important data before making major changes to your device. # Palm Swipe To Capture Not Working

How To Use Palm Swipe To Capture Gesture Motion?

It’s very convenient and quick to take a screenshot on your Android device when you use the “Palm Swipe to Capture” gesture motion.

Here’s how to do it:

1. Enable the Feature:

If you wish to use the “Palm Swipe to Capture” gesture, you must ensure that it has been enabled on your device.

The procedure varies depending on your Android version and device manufacturer, but generally speaking, you need to follow the steps below:

  • Select “Settings” from your device’s home screen.
  • If you scroll down to the bottom, you will see an option for “Advanced features” or “Motions and gestures”.
  • You can toggle on “Palm swipe to capture” or a similar feature.

2. Perform the Gesture:

The “Palm Swipe to Capture” gesture can be used to take screenshots after enabling the feature:

  • To capture a screen, navigate to it.
  • Make sure your hand is horizontal to the screen, and position your palm vertically.
  • Touch the screen lightly with your palm as you swipe across it from right to left or left to right.
  • Screenshots are taken when you hear a shutter sound and the screen briefly flashes.

3. View and Edit the Screenshot:

Depending on your device, you can usually access a screenshot from the notification bar or the “Gallery” or “Photos” app.

From there, you can view, edit, share, or delete it. # Use Palm Swipe To Capture Gesture Motion

4. Disable the Feature:

Using the same steps mentioned earlier, you can disable the “Palm Swipe to Capture” gesture by accessing the settings.

Depending on the model and make of your device, these settings may not be available or accessible.

For specific instructions related to your device, refer to the manufacturer’s website or your user manual if you cannot find the option or if it does not work as expected.

When you use your Android device’s “Palm Swipe to Capture” gesture motion, you can take screenshots quickly and efficiently without having to press any physical buttons.

What Are Different Methods To Take Screenshots On Samsung?

On Samsung devices, you can take a screenshot in several ways:

  • To take a screenshot, press and hold the Power and Home buttons together on your device. 
  • Press and hold Power and Volume Down buttons together if your device does not have a home button. 
  • You can also take a screenshot with Google Assistant by saying ‘OK Google, take a screenshot’. 
  • Press the button on your S Pen and wave the pen twice in the air to take a screenshot.
  • The screenshot will be taken; you will need to save it. 
  • On your device, you can also take a screenshot by using the Palm Swipe to Capture feature.
  • Take a screenshot by swiping the edge of your palm across your device’s screen. 


While capturing screenshots with the “Palm Swipe to Capture” feature on Android devices is convenient, it can occasionally encounter issues.

When it stops working, it can be frustrating, but the good news is that it can usually be fixed.

This blog post covers a number of troubleshooting steps to help you resolve “Palm Swipe to Capture” issues. You should be able to resolve the issue and continue capturing screenshots effortlessly by checking settings, ensuring your device is updated, and making some simple adjustments.

Leave a Reply